Home > Kernel Hda > Kernel Hda Task_no_data_intr Error=0x04 Drivestatuserror

Kernel Hda Task_no_data_intr Error=0x04 Drivestatuserror

mice: PS/2 mouse device common for all mice serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on Comment 8 Dave Jones 2003-10-02 11:20:02 EDT We're starting to suspect DMA problems with fireball drives, as this is the third report I've been able to find, which is the only EXT3-fs abort (device lvm(58,0)): ext3_journal_start: Detected aborted journal Remounting filesystem read-only hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete}hda: task_no_data_intr: error=0x04 { DriveStatusError } hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: Interesting. his comment is here

hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } hda: Write Cache FAILED Flushing! Thank you! It is also possible that your motherboard is getting old and that the chipset is sending some bad things to the hdds. Comment 17 Thornton Prime 2003-10-15 21:25:34 EDT Sorry, I never got a chance to load 2086, but I am now running 2088 (Severn3).

That won't fix the problem though, 2.6.6 was just more verbose about the cache flush failing, going back to 2.6.5 will just hide the message that the flush failed. redarrow View Public Profile View LQ Blog View Review Entries View HCL Entries Find More Posts by redarrow 09-16-2006, 10:44 AM #8 Half_Elf LQ Guru Registered: Sep 2001 Location: Comment 2 Marc poulhi 2004-05-13 01:19:49 UTC Here's what i get when booting with acpi=noirq. Oh, i just upgraded to kernel 2.6.6 (stock from kernel.org).

They are however, very likely to be unrelated to the corruption problem reported here before bugzilla ate the original reporters posting.. Console: colour VGA+ 80x25 Calibrating delay loop... 1392.64 BogoMIPS Memory: 124212k/129792k available (1509k kernel code, 5192k reserved, 1114k dat)Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash This works for me! You should get some infos like : ...

OK. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX3: IDE controller at PCI slot 00:07.1 PIIX3: chipset revision 0 PIIX3: not 100% native mode: will probe irqs I rebuilt and rebooted (with the correct parameters -- boot messages attached) and started over ... This...

pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SEdttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a Notices Welcome to LinuxQuestions.org, a friendly and active Linux Community. redarrow View Public Profile View LQ Blog View Review Entries View HCL Entries Find More Posts by redarrow 09-16-2006, 09:37 AM #7 redarrow Member Registered: Jul 2005 Location: South this certainly points to something beneath the filesystem as the source of the corruption.

CPU: Intel Pentium III (Coppermine) stepping 03 Enabling fast FPU save and restore... PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) Transparent bridge - Intel Corp. 82801AA All rights reserved Use of this Site constitutes acceptance of our User Agreement (effective 3/21/12) and Privacy Policy (effective 3/21/12), and Ars Technica Addendum (effective 5/17/2012) Your California Privacy Rights The Ad Choices Solutions Products Community Support Partners Education About Us Support Login Self-Help Search the Knowledge Base Diagnose BIG-IP system License System Download Software Subscribe: RSS Subscribe: Mailing Lists Need Additional

I thought I might have a bad hard drive, however I replaced it recently and the new one is doing precisely the same thing I also checked the smartd error logs this content Sign up for Subscriber's Choice at the following URL: http://www.hp.com/go/myadvisory NAVIGATION TIP : For hints on navigating HP.com to locate the latest drivers, patches, and other support software downloads for ProLiant With the kernel version 2.6.5 this message did not appear. The help text is out of date, and those warnings can occur from other parts of the IDE code.

The compact flash media drive can perform only programmed input/output data transfer operations.

Was this resource helpful in solving your issue? Comment 19 Thornton Prime 2003-10-16 21:39:10 EDT # hdparm -I /dev/hda /dev/hda: ATA device, with non-removable media Model Number: QUANTUM FIREBALLP AS30.0 Serial Number: 193036239076 Firmware Revision: A1Y.1300 Standards: Used: ATA/ATAPI-5 poormanscomputer Ars Scholae Palatinae Registered: Jul 12, 2001Posts: 789 Posted: Wed May 12, 2004 10:53 pm quote: These warnings are _harmless_.Your drives have write cache supportbut don't understand flush cache commands. http://canondrivebh.com/kernel-hda/kernel-hda-drive-cmd-error-0x04-drivestatuserror.html What is the exact problem?

Login as root: and type the following command: [[email protected] root]# fdisk /dev/hdc 2. Seems like I'm also unable to make ext3 fs on the disks. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo done.

This time I am able to boot with init=/bin/sh and I was able to repair.

Alan - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo [at] vger More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ Half_Elf View Public Profile View LQ Blog View Review Entries View HCL Entries Visit Half_Elf's homepage! Can you paste the output of hdparm -I /dev/hda (or whatever drive that Quantum Fireball is). Don't really know what else to give in order to help.

To slow it down, try a command like : "hdparm -Xudma0 /dev/hda" DMA is very intensive on hdd, plus using a mode badly supported by your hdd might make it to Drive errors in the system log files /dev/sda: HDIO_GET_IDENTITY failed: Invalid argument Drive errors in the system log files /dev/sda: HDIO_GET_IDENTITY failed: Invalid argumentThis... I have another harddisk (Western Digital) in the same machine and bus and it doesn not have any messages printed for it. http://canondrivebh.com/kernel-hda/kernel-hda-dma-intr-error-0x84-drivestatuserror-badcrc.html The system also hangs when I boot without adding "apm=off acpi=off", but I suspect that's unrelated.

This one is only about one month old.. Loading... ext3_abort called. Was this answer helpful?

Quote: Originally Posted by Half_Elf It is also possible that your motherboard is getting old and that the chipset is sending some bad things to the hdds. Either your system is using a mode not supported by your hdd, or the system can't tell you what mode it is using. However you might want to slow it down (to udma0 as example). VP_IDE: Use ide0=ata66 if you want to assume 80-wire cable.

Knowledgebase Portal Home Knowledgebase Hard Drives Drive errors in the system log (status=0x51, error=0x04) Categories Backups & Storage 1 Bandwidth 3 Control Panels 4 Database 4 The information in this document is subject to change without notice. some of the voltage levels seem a bit low... Close Submit Red Hat Bugzilla – Bug91932 IDE Errors Last modified: 2015-01-04 17:02:35 EST Home | New | Search | [?] | Reports | Requests | Help | NewAccount | Log

RESOLUTION KVM guests running Red Hat Enterprise Linux 6 will not experience this issue. Intel machine check reporting enabled on CPU#0. Another issue is that before every computer restart the harddrive is spinned down, which I find useless, and even hurtful, because the harddrive is restarted in just a couple of seconds Looks like Andrew Morton is fixing this.